Results 1 to 4 of 4

Thread: Plywood Tank Two Sided Viewing?

  1. #1
    DIYFK member sloanrd's Avatar


    Join Date
    Sep 2015
    Location
    NORCAL
    Posts
    32
    Post Thanks / Like

    Plywood Tank Two Sided Viewing?

    Hi All,
    My next tank is going to be a plywood build, 96"L x 24"H 36"D. My question is, can I use one side and front as viewing sections? One side and back will be against walls. To maximize viewing area I want one side to be framed just like the front. Is this practical? Thoughts...

  2. #2
    DIYFK member Meep's Avatar


    Join Date
    Oct 2013
    Location
    Planet Earth
    Posts
    3,174
    Post Thanks / Like
    Sure, it's possible just make sure the corners and 'headers' above the windows are sufficient as to not allow any bowing that will cause failure...

  3. #3
    DIYFK member sloanrd's Avatar


    Join Date
    Sep 2015
    Location
    NORCAL
    Posts
    32
    Post Thanks / Like
    Click here to enlarge Originally Posted by Meep Click here to enlarge
    Sure, it's possible just make sure the corners and 'headers' above the windows are sufficient as to not allow any bowing that will cause failure...
    Thanks, I was considering on the side 2" border and 3" on the front. In your opinion would this be sufficient?

  4. #4
    DIYFK member Meep's Avatar


    Join Date
    Oct 2013
    Location
    Planet Earth
    Posts
    3,174
    Post Thanks / Like
    I would have to see plans and dimensions to give you an opinion...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •