Play around and test different sands, the bigger the grits the more 'pimply' it will look... You might find tile grouts that have finer sand mixed in might give a better sand stone looking texture, but do note that mixing grout into the Drylock will make it incredibly thick and it will literally turn it into a cement, so mix small batches that you can used before the cement in the grout kicks in (aka don't mix into the entire can of paint and end up with a wasted can) and add a little water to make it spread better after adding the sand...
That or you can get some mesh screen and sift any sand you use to a smaller size... A dollar store grease splatter guard might work well for this...
Thank you Warfie for the compliment and idea, and Meep for the suggestions too.
I have plenty of sand to play with, and grout. So, maybe I can experiment with making some of the layers with that look, and others not. That's what it looks like in rock formations where shale, slate and sandstone appear together. Variety is the spice of life
Originally Posted by Warfie
Hi everyone. Sorry for the lack of updates. I'm struggling with the roots. I've bent and scrapped a bunch of CPVC scraps and can't come up with anything that I'm satisfied with. I'm at the point making a decision to start over with the roots or keep going. The look that I'm going for is to have a root system that conceals my powerhead which delivers flow to the middle to lower water column, while allowing to have the canister filter spray bar deliver flow at the surface over the top of the root system, but the roots conceal that from view. This picture is my inspiration, as I imagine that you'd be looking from the right side of the tank, with the front of the tank to the left of the photo:
Obviously, I can't fit the entire structure of the picture into my narrow tank, but, I can mimic the cool aspects of the roots and achieve what I want...I hope.
I've put together a CPVC skeleton with some pipe insulation to kind of get me the basic root structure frame, right tank side view, like the picture:
Here's the front view:
I really like the old torn away area of the root extending to the right in the picture, and want to incorporate that into my tank. But, although I'm getting there, I don't like what I've done, so I'll probably redo that:
I'm a little frustrated right now. If I decide to go forward, the next steps would be:
- finish the frame and secure all of the pieces.
- apply tile adhesive to the entire frame (so spray foam and grout can stick to it).
- use spray foam to add bulk and a more realistic shape that I can carve to achieve the desired look.
- apply grout to firm everything up and give it a base color. With the grout, I can further carve and shape to get the and shape texture that I want.
- use Drylok mixed with cement color to paint the final touches
That's the plan anyway. I had an idea this morning to just make the roots occupy the upper half of the tank to hide the powerhead and spray bar, and not have it go all the way to the bottom. If I do that, then I'll use pieces of what I have here. What do you all think? I appreciate suggestions very much.
Thanks for following!
Just throwing it out there but why not use real wood. I'm sure you could find a piece to your liking.
I like the challenge of duplicating nature, the art of it, so right now, that's the main driver for why I'm doing it this way. One advantage with DIY is that you can create exactly the shape and fit that you need. My frustration is probably due to being too much of a perfectionist. I get motivated by instant results and progress. When things don't work out close to what I envision, then I get frustrated and things stall. It's a flaw in my personality, I guess. If I take a few steps backwards, t wouldn't be the first time that I've changed my approach to the background of this tank. But, I'm getting impatient because I want to get it cycled and start collecting fish for it. Times a wastin'.
Originally Posted by Sasquatch
In the end, if I'm not happy with what I've made with regard to the roots, I'm not against using real wood. I go fishing a lot, so I'll be keeping my eye out for a suitable piece. If I find one, then I'll get it ready for my tank. If I wind up happy with the DIY roots, then I can always use the piece of wood that I find for another tank
Thanks for the suggestion and feedback!
I know you are well on your way, but an idea for the future... Many years ago when I was creating some artificial branches for reptile enclosures, I would feed some 'hold the shape wire' up the middle of a piece of rope, assemble the wired rope into the shape you want, then you can spiral wrap 'cotton' or 'natural twine' around the entire assembly to add bulk... Once you get the rough shape, mix up some fiberglass resin (light on the activator so it cures a little slower) and then using some disposable chip brushes, brush on and let the resin soak the heck out of the natural fiber rope, the end result is a very strong base structure the with a little more surface prep can be made to look very realistic... If you want it even stronger, you can soak each stage of the rope wrap up, creating essentially a solid fiberglass structure...
I have the same personality so I understand. Only difference is I like actual nature as opposed to recreating it. Although I do have an artistic side to me so I get why you want to recreate it. Best of luck to you!
Originally Posted by Chasmodes
BTW, getting frustrated isn't a bad thing. I consider it good to want things how you envisioned them. My 2 cents.